Do you want resolution analysis (yes/no) ?
yes
Number of points per wave length distribution (%)
From 0 to 5 :
.0
From 5 to 6 :
.0
From 6 to 7 :
.0
From 7 to 8 :
.0
From 8 to 9 :
.0
From 9 to 10 :
.0
From 10 to 11 :
.0
From 11 to 12 :
.0
From 12 to 13 :
.0
From 13 to 14 :
.0
From 14 to 15 :
.0
From 15 up : 100.0
End of program, Press ENTER to continue
The last set of information following "Number of points per wave length
distribution (%)" is the resolution data for this geometry, calculated from the grid-network
and wave period specified by the user in the general information file. As stated earlier, less
than 5 grid points per wavelength is not valid, over 15 points per wavelength is generally
very good. The resolution data shown is for the entire computational domain and it gives
the resolution distribution for all the elements. This information is output to the screen
only. The user may copy and retain it manually for later reference. This feature is also
useful if the same grid is to be used again with a different wave period; the resolution
analysis will help to determine whether or not grid modification is necessary. This may be
the case if the new wave period is smaller than the original design period wave.
60
Previous Page
