the grid may be viewed by clicking the "Display Module Info" tool, or by selecting "Get
Info..." from the "File" menu. You may now quit SMS.
7.4 The General Information File (*.gen)
A template called "cgwave.gen" is provided for the benefit of the user. A new
copy of this file should be made for each application. The contents of the file are written
in ASCII text and appear below. Note that the incident wave conditions contain data for a
single (monochromatic) model run. Spectral input conditions may be input by including
additional lines below the first (Angle/Period/Amplitude) line. Two empty (blank) lines
should follow the last (Angle/Period/Amplitude) line, separating it from the "2) Open
Boundary ..." line. Incident angles are measured in degrees and the incident direction is
defined such that the incident wave travels in the positive x-direction when θi is equal to
zero.
PROJECT : Project Name
(...blank line)
(...blank line)
1) Incident Wave Conditions:
(...blank line)
No. Incident Wave Angle || Wave Period (s) || Incident Wave Amplitude
1
0.0
30.0
1.0
(...blank line)
(...blank line)
2) Open Boundary (Bessel Series = 0, Parabolic = 1, Box = 2) : 1
(...blank line)
If Bessel Series, Number of Terms Used
: 50
If Parabolic, Exterior Coastline Reflection : 0.0
(...blank line)
(...blank line)
3) Bottom Friction (Yes=1,No=0) ? 0
57
Previous Page
