Hivel2D users manual
Figure 3.4 Hot Start
Boundary Conditions
The inflow Boundary conditions can be assigned using the Assign Boundary
Conditions dialog, by selecting a specific node for assigning nodal boundary conditions
(fig 3.6) or by selecting a node string for assigning the node string boundary conditions
(fig 3.7). The outflow boundary conditions are assigned only using the node string option
(fig 3.7). A detailed description of the boundary conditions are given in Appendix B.
Existing nodal or node string boundary conditions can be deleted using the Delete
Boundary Conditions dialog.
18
Chapter 3 Developing an Application
Previous Page
