(a) Check: elements, contours, and mesh boundary.
File | Open -> grid.14 as a file of type: (*.grd, *.14).
2.
Data | DataBrowser | Import -> current_base.64 as ADCIRC
3.
unit 64: (*.64, *.sol).
(a) Create a new solution set? OK.
(b) Press, Vector -> Scalars:
(1) Check, All Time Steps
(2) Select Vx & Vy.
(3) Perform the conversion.
(4) Done.
(c) Done.
Data | MeshToScatterPoint -> scatter1, OK
4.
b. Scatter Module -
Display | DisplayOptions->Points off.
1.
c. Reduce image. The area to retain is on the right side of the mesh
approximately halfway down where you will notice a sinuous feature.
This feature is the river referenced previously in this chapter when
discussing how to "Build STWAVE Cartesian Grid." Several iterations
of the following commands are needed to remove excess points.
Mesh Module -
1.
(a) Edit | Select with Poly...
(1) Click mouse around the grid at points to be removed.
(2) Double-click to close selection area.
(3) Edit->Delete.
(4) Tool Palette | Frame Tool
to zoom out.
(5) Repeat 1-4 as needed.
d. Change the coordinate system of the input current field to the coordinate
system of the wave model.
36
Chapter 5 SMS User Interface