(2) Select, Depth Interpolated
(3) Press, elevation.
i. Interpolated Method: Linear
ii. Scatter Set: scatter1 (Same name assigned in prior
mesh to scatter set conversion.)
iii. Function: Magnitude (64)
iv. Time-Steps: Single
v. Time-Step Interpolation: Match Time-Steps
vi. OK
vii. NOTE: This example is using high-resolution
bathymetry data to generate the STWAVE grid. When
that is not available, this step can also generate an
STWAVE depth grid based on the ADCIRC
bathymetry.
(4) Check, Current.
(5) Press Interpolated to interpolate the current fields.
(6) Press, Velocity(64).
Interpolated Method: Linear.
i.
ii. Scatter Set: Same name assigned in Depth
Interpolated.
iii. Time-steps: Multiple.
iv. Select, Velocity64
Select, X/Y
v.
vi. Time-Step Interpolation: Match Time-Step
vii. Beg=175500, End=200700
viii. OK
(7) OK
f. Turn off Mesh Points:
38
Chapter 5 SMS User Interface
Previous Page
