4/98
SED2D-WES Version 4.3 Beta
Table 1 shows the required and optional input data files for SED2D-WES.
Table 1: Standard Input Files
Generic
Standard
File
Logical
Name*
Unit
Contents
Status
OLD
User specified names of input and
(created interactively by
screen or master
depends on operating
output files as requested on the $L
the user during program
file
system
cards.
execution, or with an
(required)
FORM=
editor for batch
FORMATTED
processing)
9
SED2D-WES run control file.
OLD
project1.sed
(required)
FORM=
(created by the user:
FORMATTED
see users manual)
Information about the numerical
mesh geometry, connectivity,
bathymetry, and material type
OLD
project0.gbn
10
associations.
(created by GFGEN)
(required)
FORM=
UNFORMATTED
Information about the steady state
or dynamic flow field.
project0.sol
20
FORM=
OLD
(required)
UNFORMATTED
(created by RMA2-WES)
30
Information about the
(required to hotstart either
concentration field and the net bed
project0.cdb
concentration and/or bed
change calculated from a previous
OLD
change;
SED2D-WES run.
(created by SED2D-WES)
not required for coldstart)
FORM=
UNFORMATTED
Information about the clay bed
40
structure calculated from a
project0.bs
(required to hotstart clay
previous SED2D-WES run.
OLD
bed structure;
FORM=
(created by SED2D-WES)
not required for coldstart)
UNFORMATTED
50
Information about wind fetch by
OLD
project1.fch
(required for wave shear
node.
(created by the user:
stress option; otherwise
FORM=
see description of HS
not required)
FORMATTED
card)
60
Information about the wind speed
OLD
project1.wnd
(required for wave shear
and direction by node.
(created by the user:
stress option; otherwise
FORM=
see description of HS
not required)
FORMATTED
card)
70
Information about the point source
project1.psc
(required for point source
loadings.
OLD
option; otherwise not
FORM=
(created by the user:
required)
FORMATTED
see description of PC card)
* These are examples only; the user may develop any organized file naming strategy.
19
WORKING DRAFT
Previous Page
