USGS, 1997a, "Computation of Fluvial-Sediment Discharge," Techniques of Water-
Resources Investigations of the USGS, Book 3, Chapt. C3, Reston, VA.
USGS, 1997b, Laboratory Theory and Methods for Sediment Analysis," Techniques of
Water-Resources Investigations of the USGS, Book 5, Chapt. C1, Reston, VA.
U.S. Inter-Agency Subcommittee on Sedimentation, 1952, Reports, USGS, Reston, VA,
District Engineer, Corps of Engineers, St. Paul, MN.
Report No. 1, 1940a, "Field Practice and Equipment Used in Sampling Suspended
Sediment."
Report No. 2, 1940b, "Equipment Used for Sampling Bedload and Bed Material."
Report No. 3, 1941a, "Analytical Study of Methods of Sampling Suspended
Sediment."
Report No. 4, 1941b, "Methods of Analyzing Sediment Samples."
Report No. 5, 1941c, "Laboratory Investigation of Suspended Sediment Samplers."
Report No. 6, 1952, "The Design of Improved Types of Suspended Sediment
Samplers."
Report No. 7, 1943, "A Study of New Methods for Size Analysis of Suspended
Sediment Samples."
Report No. 8, 1948, "Measurement of the Sediment Discharge of Streams."
Report No. 11, 1957a, "The Development and Calibration of the Visual-Accumulation
Tube."
Report No. 12, 1957b, "Some Fundamentals of Particle-Size Analysis."
U.S. Water Resources Council, Hydrology Committee, 1981, "Guidelines for Determining
Flood Frequency," Bulletin 17B, USGS, Reston, VA.
Vanoni, V.A. (ed), 1975, 1977, "Sedimentation Engineering," ASCE Manuals and Reports on
Engineering Practice No. 54, Reston, VA.
Vanoni, V.A., 1978, "Predicting Sediment Discharge in Alluvial Channel, Water Supply
Management," Pergamon Press, Oxford, pp. 399-417.
Vanoni, V.A. and Brooks, N.H., 1957, "Laboratory Studies of the Roughness and Suspended
Load of Alluvial Streams," California Institute of Technology Sedimentation Laboratory,
Report No. E-68, Pasadena, CA.
Vanoni, V.A and Hwang, L.S., 1967, "Relation Between Bed Forms and Friction in Streams,"
ASCE Hydr. Div., Jour., Vol. 93, No. HY3, pp. 121-144.
von Karman, T., 1930, "Mechanische Aehnlichkeit und Turbulenz," Proceedings, Third
International Congress for Applied Mechanics, Stockholm.
11.26
Previous Page
