D-R-A-F-T
$L1 CARD: Input File Control
Required
Card Description: Active parameters on this card cause the program to read data
from the requested file. The user will be asked to interactively supply file names for
the requested files.
Field
Variable
Value Description
0, C 1-2
IC1
$L1
Card group identifier.
GFGEN binary geometry. (Input LU= 10. No
1
INGEOM
+
default) See note below.
0
Off (GNN and GE cards required)
RMA2 binary hydrodynamic. (Input LU = 20. No
2
INRMA2
+
default)
This file is mandatory
HOTSTART Concentration/Delbed binary (Input
3
INHOT
+
LU = 30)
0
Off (This is the default)
4
INHOTB
+
HOTSTART Bed structure binary (Input LU = 40)
0
Off (This is the default)
5
INFETCH
+
Wind fetch (Input LU = 50)
0
Off (This is the default)
6
INWIND
+
Wind speed and direction (Input LU = 60)
0
Off (This is the default)
7
INWAVE
+
Wave model results input (Input LU= 80)
0
Off (This is the default)
NOTE: One-dimensional elements are currently not supported by SED2D
WES. Any one-dimensional elements within the mesh will be modified to have
material type = 0 when the geometry file is read in.
74 Run Control $L1 Card
Users Guide To SED2D-WES
Previous Page
