Project: Bonneville Second Powerhouse 1:25-scale Fish Guidance Efficiency Model
PI: Robert A. Davidson
Project Description/Activities/Capabilities:
Powerhouse operations, fish-passage design, hydraulic modeling, hydraulic structures
Sponsor: Portland District. POC Brad Bird
CHL Personnel
Bob Davidson, Marshall Thomas, Danea Polk, Jason Jackson
Project Location and Description:
Bonneville Dam is about 6400 feet long and includes two powerhouses, a spillway, two navigation
locks, multiple fish ladders, and four islands. A total of six 59-megawatt units and eight 77-
megawatt turbines reside in Powerhouse No. 1 and No. 2, respectfully. The 18-bay spillway is
approximately 1100 feet long, and has twelve 50.75-ft-high vertical lift gates and six 60-ft-high
wheel gates. The spillway crest is located at elevation 24 with a normal pool elevation ranging
from 71.5 to 76.5. Spillway bays 4 through 15 and 18 have deflectors that are 12 ft long and are
located at el 14. The stilling basin is a horizontal apron-type with a double row of sloping baffle
blocks. The stilling basin is 147 ft long with an invert elevation of -16 for the first 71 ft and drops
to el -24 for the remaining length. An irregular concrete apron is at the end of the stilling basin
and usually slopes downward to the tailrace topography. The old lock is76 ft wide by 500 ft long.
It discharges into a navigation channel that joins the releases from Powerhouse No. 1
approximately 1200 ft downstream of the lock. The new lock is 86 feet by 675 feet and
discharges into a channel that joins the discharge from the remainder of the project about 2600 ft
downstream of the lock. Powerhouse discharges and lock operation only indirectly influence the
spillway flow conditions by changing the local tailwater elevation
Facilities:
Related Topic Areas: Physical models, fish passage, juvenile bypass system, vertical barrier
screens, extended submerged bar screens, trashracks, debris, rivers, reservoirs, hydraulic
structures
Previous Page
