4/98
SED2D-WES Version 4.3 Beta
GE CARD
GRID, ELEMENT CONNECTION TABLE
GE CARD
The element connection table will usually be provided by the GFGEN pre-processor and will reside on logical unit
ING on the $L1-card. If so, omit GE and GNN cards.
Not required
Field
Variable
Value
Description
0,C1-2
IC1
GE
Card group identifier
1
J
+
Element number
2-9
NOP (J,K)
+
Up to 8 node numbers for element J, listed counterclockwise
around the element starting from any corner.
10
IMAT (J)
+
Element material type
11
TH (J)
+
Direction of eddy viscosity tensor in RMA2. Optional, may
be specified on the GV card. Radians, counter-clockwise
from the X-axis. For 1D elements, the direction is
automatically aligned with the orientation of the 1D element
NOTE: Use GE and GNN cards only to create simple grids for model testing. SED2D-WES does not contain grid
generation or band width optimization routines.
56
WORKING DRAFT
Previous Page
