4/98
SED2D-WES Version 4.3 Beta
$L1 CARD
INPUT FILE CONTROL
$L1 CARD
Active parameters on this card cause the program to read data from the requested file. The user will be
asked to interactively supply file names for the requested files.
Required
Field
Variable
Value
Description
0,C1-3
IC1
$L1
Card group identifier
1
ING
+
GFGEN binary geometry. (Input LU= 10. No default)
See note below.
0
Off (GNN and GE cards required)
2
INRMA2
+
RMA2 binary hydrodynamic. (Input LU = 20. No default)
This file is mandatory
3
INHOT
+
HOTSTART Concentration/Delbed binary (Input LU = 30)
0
Off (This is the default)
4
INHOTB
+
HOTSTART Bed structure binary (Input LU = 40)
0
Off (This is the default)
5
INFETCH
+
Wind fetch (Input LU = 50)
0
Off (This is the default)
6
INWIND
+
Wind speed and direction (Input LU = 60)
0
Off (This is the default)
7
INPSC
+
Point source concentration (Input LU = 70)
0
Off (This is the default)
NOTE: One-dimensional elements are currently not supporte by SED2D-WES. Any one dimensional elements
within the mesh will be modified to have material type = 0 when the geometry file is read in.
37
WORKING DRAFT
Previous Page
