BF CARD: Bed Flux Controls
Card Description: Active parameters on these cards cause the program to use the
specified parameter values in place of the default values.
0, C 1-2
Card group identifier.
(Default) Flag controlling the application of a
correction factor to the concentration used for bed
flux for clay reflecting the fact that the bottom
concentration is larger than the depth-averaged
value. The correction factor is function of the
vertical fall velocity, the horizontal velocity.
No correction is made
Flag controlling the adjustment of the average flux
over a time step based on development in
No adjustment made (default)
A factor applied to the water depth over which the
sediment falls. This value has historically been set
to 0.5. Based on conversations with Dr. Ray
Krone, it is now recommended that this be set to
1.0 (default). For backward compatibility use 0.5.
Run Control BF Card 79
Users Guide To SED2D-WES